Note:
• When you log on to the IP Deskphone for the first time, the system prompts you for a
location. For more information, see Selecting a location on page 42
• The 1230 IP Deskphone retains the previous user logon ID, which appears after the ID
prompt whenever the IP Deskphone reboots.
If Authentication is enabled by your system administration, you can enter your authentication
ID independent of your user ID. The authentication ID is used when the server challenges the
IP Deskphone.
To log on to the 1230 IP Deskphone
abc 1. Press the abc/123 soft key to toggle between
alphabetic or numeric input.
2. Use the dialpad to enter your user ID login at the
prompt.
Note:
Use the left navigation key to backspace and
remove a previous user ID.
Login 3. Press the Login soft key.
If Authentication is enabled by your system
administration, you are presented with the
Authentication ID screen. The authentication ID is
autofilled with your user ID.
If Authentication is not enabled, a new screen
appears and prompts you for your password.
• Press the abc/123 soft key to toggle between
alphanumeric or numeric input.
•
Use the dialpad to enter your authentication ID login
at the prompt.
• Press the Login soft key.
A new screen appears and prompts you for your
user password.
Logging on
Avaya 1230 IP Deskphone with SIP Software User Guide November 2013 39
To Next Page
Loading...
