Feature-related icons
Depending on their purpose, some feature-related icons appear on the top line, for example, to
notify you that the Send All Calls features is active or if a system failover is occurring. Other icons
display on the Feature Menu to indicate whether the individual features listed are active or
inactive.
Icon Description
Icon indicating the telephone is not connected to its network and
is operating in "failover" mode. Some features may not be
available or work correctly. See Limited access during failover on
page 109 for information.
Send All Calls feature is activated.
Feature is activated.
Feature is off (not activated).
Indicates that the call is using a wideband codec for excellent
voice quality.
Indicates a low network performance or presence of local
network issues that might result in lower call quality.
Indicates that the user enabled the LNCC feature.
User can control the number of concurrent incoming calls by
using the Limit Number of Concurrent Calls (LNCC) feature that
changes the Multiple Call Appearance deskphone to a Single
Call Appearance deskphone. If the user receives an incoming
call when the LNCC feature is active and the user is already on a
call, the caller gets the busy tone.
Indicates the Team idle state on idle line.
Indicates the deskphone is locked.
Indicates the Team idle and forward state on an idle line.
Indicates the Team single incoming call in on idle line.
Indicates the Team multiple incoming calls in on idle line.
Indicates the Team busy state on a busy line.
Table continues…
Introduction to 9621G and 9641G/9641GS SIP deskphones
October 2019 Using Avaya 9621G/9641G/9641GS IP Deskphones SIP 20
Comments on this document? infodev@avaya.com