Activating mute alerting
You can configure your phone to alert you if your phone is on mute. The alert can be an audible
beep and a visible indication on the top line of your phone. Mute alerting is turned off automatically
when you press the Mute button to take the call off mute.
Procedure
1. Press Main Menu.
2. Tap Settings > Options & Settings > Call Settings > Mute Alerting.
3. Tap to select from one of the following options:
• Audible: If you put a call on mute and start speaking, after 15 seconds, the phone
produces a beep to notify you that you have muted your phone.
• Visual: If you put a call on mute and start speaking, after 15 seconds, the phones
displays a message that reads “Phone is on mute” on the phone status line.
• Both: Combines the actions and options of both audible and visual alerting.
• None: Disables the mute alerting feature for your phone.
4. Tap Save.
Setting the Quick Touch panel
About this task
When you use the Quick Touch panel, the Phone screen provides access to your features or call
appearance buttons at a glance. You can set the Quick Touch Panel to display one or two lines, or
not display any lines. Displaying the Quick Touch panel can limit your call appearances display to
three lines at a time.
Procedure
1. Press Home.
2. Tap Settings.
3. Tap Options & Settings.
4. Tap Screen and Sound Options.
5. On the Screen and Sounds menu, tap Show Quick Touch Panel to change the setting
from 1 Line to 2 Lines, from 2 Lines to No, or from 0 to 1 Line.
6. Tap Save to save the setting or Cancel to return to the menu without saving.
Changing the display language
The Home Screen
October 2019 Using Avaya 9621G/9641G/9641GS IP Deskphones SIP 40
Comments on this document? infodev@avaya.com
To Next Page
Loading...
