Avaya 9621G - Extending a Call to Your Cell Phone (EC500); Visual Alert for an Encrypted Call

2. Scroll to EC500, press OK and tap the corresponding line.
When you enable the EC500 feature, the deskphone displays the
icon in the top line.
Extending a call to your cell phone (EC500)
About this task
You can use the Extend Call feature to receive a call that is active on your office phone on your
mobile phone. The Extend Call feature uses EC500 Extension to Cellular. You to transfer an office
call to your mobile phone and move away from your desk. This feature is programmed by your
system administrator.
Note:
Your administrator can set the destination mobile number.
Procedure
1. During an active call, gain access to the Features screen.
2. Scroll to Extend Call, and tap to forward the call to your mobile phone.
3. Answer the call on your cell phone.
The call remains active on your phone, so you can switch back to your phone at any time.
Visual alert for an encrypted call
While using your phone, you can now see whether an incoming or an outgoing call is encrypted.
The secure status is indicated by the secure icon, a padlock, on the active call appearance.
Note:
The secure icon appears only if a two-party call is encrypted.
Managing features
October 2019 Using Avaya 9621G/9641G/9641GS IP Deskphones SIP 90
Comments on this document? infodev@avaya.com