Avaya 9621G - Setting up a Bluetooth Enabled Headset; Pairing a Bluetooth Enabled Headset with Your Phone

Setting up a Bluetooth
®
enabled headset
The Bluetooth
®
wireless technology is available only for the 9641G and 9641GS deskphones and
if the administrator enabled the feature. The deskphone displays the Bluetooth
®
related options in
the menu if the feature is enabled.
You can connect Bluetooth
®
enabled headsets to the 9641G and 9641GS deskphones. The
deskphones support the Bluetooth
®
headset profile.
In the headset profile, you can use the following features:
• Answer incoming calls
• Drop the active call
• Transfer calls between the headset and the speaker
Pairing a Bluetooth
®
enabled headset with your phone
About this task
Before using your Bluetooth
®
enabled headset, you must pair the headset with your phone.
You can pair a maximum of 10 Bluetooth
®
enabled headsets with the deskphones, but you can
use only one headset at a time. The deskphone displays the list of available devices and paired
devices.
Before you begin
Ensure that the Bluetooth
®
enabled headset that you want to pair to the phone is in discoverable
mode.
Procedure
1. Press Home.
2. Tap Settings > Options & Settings > Bluetooth Setup.
The deskphone displays a list of available and paired devices if any.
3. Perform one of the following actions:
• To pair a headset, tap the required headset from the available devices.
• To unpair and disconnect a paired headset, under Paired devices, tap Unpair >
Disconn.
• To scan for other available devices:
a. Tap Scan.
b. Tap the required device that the deskphone displays after scanning.
The Home Screen
October 2019 Using Avaya 9621G/9641G/9641GS IP Deskphones SIP 44
Comments on this document? infodev@avaya.com