4. Tap Save.
Setting dialing options
About this task
Your phone has the following dialing options:
• You can dial a number by picking up the handset, getting a dial tone, and dialing the required
number (off-hook dialing).
• If you set the Edit Dialing feature, you can enter the number or a part of it, edit the entered
digits if needed, and press the corresponding softkey to dial.
When on-hook dialing is enabled, Edit Dialing is not available.
If you activated the Limit Number of Concurrent Calls (LNCC) feature in the edit dialing mode, and
you start dialing a number when at the same time your phone receives a call, the phone logs this
call as a missed call.
Procedure
1. Press Main Menu.
2. Tap Settings > Options & Settings > Call Settings > Dialing options.
3. Tap to select On-hook or Editable.
During an active call, when you select the second line appearance, the first line
appearance goes on hold and the Editable mode is disabled irrespective of your Dialing
options setting.
4. Tap Save.
Toggling name and number
About this task
Use this procedure to display either caller name or caller number if the caller name is too long to fit
on the phone screen.
Procedure
1. Press Main Menu.
2. Press Select to select Options & Settings > Call Settings > Toggle Name/Number.
3. Press Change to select On or Off.
4. Press Save .
The Home Screen
October 2019 Using Avaya 9621G/9641G/9641GS IP Deskphones SIP 32
Comments on this document? infodev@avaya.com
To Next Page
Loading...
