2. Tap Yes when the phone displays a prompt.
Some call servers call back to confirm the emergency status. The phone automatically
answers the incoming call on the speaker by going off-hook.
3. To end the emergency call, tap End Call.
Redialing a number
Procedure
1. From the Phone screen, tap Redial.
The phone redials the last number or a list of the most recent numbers that you have
dialed appears from which you can select a number to redial.
Note:
The phone clears the last number dialed and redial list if you clear the Outgoing Call
Log. Also, the redial softkey disappears.
Note:
Your system administrator can disable Redial functionality.
2. Tap the number you want to redial, if the redial option is list.
Speed dialing a person
Procedure
On the Phone screen, press and briefly hold the dialpad key assigned to the person you want to
call. If speed dial numbers are assigned to a button module attached to your phone, press the
button assigned to the person you want to call.
Note:
Button modules are not supported on Avaya 9621G IP phone.
Autodialing a pre-assigned number
About this task
Your system administrator may set up frequently called numbers such as Information Technology
or the Help Desk as Autodial numbers, so you can dial them with one touch.
Making a call
October 2019 Using Avaya 9621G/9641G/9641GS IP Deskphones SIP 52
Comments on this document? infodev@avaya.com
To Next Page
Loading...
