Features for internal use
Issue 5 July 2001 69
Immediate Manual Override
When you activate this option, the currently active routing plan is changed
immediately to a new plan. The new plan remains in effect until the override is
deactivated manually or until the next scheduled routing plan takes effect.
To activate Immediate Manual Override:
NOTE:
The IMMEDIATE OVERRIDE lamp is lit if this option is already active.
1. Press the
IMMEDIATE OVERRIDE button.
■ The IMMEDIATE OVERRIDE lamp lights.
■ The first line of display shows:
(Where x is a number from 1 through 8 that identifies the routing
plan currently in effect.)
2. Use the touch-tone buttons to enter the number (from 1 through 8) of the
new routing plan.
■ The IMMEDIATE OVERRIDE lamp remains steadily lighted
■ Display updates to:
(Where y is the number you just entered.)
NOTE:
If you pressed any button other than the 1 through 8 buttons on the
dialpad, the Immediate Manual Override attempt is denied; the
display returns to the Normal mode. You must repeat step 1 to try
again.
3. Press the
IMMEDIATE OVERRIDE or NORMAL MODE button.
■ The IMMEDIATE OVERRIDE lamp remains steadily lighted.
■ Immediate Manual Override is active.
To deactivate Immediate Manual Override:
1. Press the
IMMEDIATE OVERRIDE button.
■ The IMMEDIATE OVERRIDE lamp goes out.
■ Scheduled daily routing plan goes into effect immediately.
OLD ROUT PLAN: x ENTER NEW PLAN:
OLD ROUT PLAN: x ENTER NEW PLAN: y
To Next Page
Loading...
