Using the features
70 DEFINITY ECS Console Operations
Clocked Manual Override
This option lets you specify the day and time to override the scheduled
Time-of-Day routing plan. You also can specify a deactivate day and time, or you
can manually deactivate Clocked Manual Override.
In the following procedure, a number from 1 through 8 specifies the desired
routing plan; a number from 1 through 7 specifies the day (1 is for Sunday and 7 is
for Saturday). The time is specified in military hours (0000 for 12:00 midnight
and 2359 for one minute before midnight).
To activate Clocked Manual Override:
NOTE:
The CLOCKED OVERRIDE lamp is lit if this option is already active.
1. Press the
CLOCKED OVERRIDE button.
■ The CLOCKED OVERRIDE lamp lights.
■ The first line of the display shows:
2. Use the touch-tone dialpad to enter the following in the order shown:
Press the 1 through 8 button (to specify the routing plan) and the 1
through 7 button (to specify the day) 0000 through 2359 (to specify the
hour).
■ The CLOCKED OVERRIDE lamp remains steadily lighted.
■ The display shows:
(Where x is the routing plan number, yyy is the 3-letter abbreviation
for the day of the week, and zz:zz is the activation time.)
NOTE:
If you enter any invalid information, the Clocked Manual Override
attempt is denied; the display returns to the Normal mode. You must
try again.
ENTER ACTIVATE ROUTE PLAN, DAY & TIME
ROUTE PLAN: x FOR: yyy ACT-TIME: zz:zz
To Next Page
Loading...
