7. Cues - Page 149
TitanUniversal_Man_v8-0_TT.doc 05 August 2014
the strobe playback, and it will keep going during the
strobe and continue smoothly when you release the
Swop button.
• Attributes set by manually applying a palette to a fixture will
override all playback priorities except Very High.
7.6.6 Blind mode
Individual playbacks can be set to Blind mode using this option. The
playback will then output only to Visualiser, not to the stage. This can
be very useful if you need to program cues during a live show.
7.6.7 Key Profile
Each playback can have an individual Key Profile allocated to it. This
allows you to customise the panel button functions differently for
each playback. A list of available Key Profiles is shown, or you can
add a new one. The softkeys show the function allocated to the blue
and grey buttons for each of the available Key Profiles.
If the playback Key Profile is set to “None”, the default global profile
is used.
To Next Page
Loading...
