2. Setting up and using the console - Page 29
TitanUniversal_Man_v8-0_TT.doc 05 August 2014
2.3.2 The menu area of the touch screen
The right hand side of the touch screen is used for the operating
menu display.
Down the right hand side of the screen, the functions of the A-G
menu softkeys are listed. If there are more functions than will fit on
one screen, [Previous] and [Next] buttons are provided to page
through the functions. You can either press the real button or touch
the key on screen.
The vertical bar to the left of the softkeys shows you which menu you
are currently in. You can 'latch' the menu (so that you don’t have to
keep reselecting it) by pressing the Menu Latch button. The menu bar
turns red when latched.
The area to the left of this shows instructions to the user and
information from the console.
At the bottom of the screen, the current function of the wheels is
shown on a simulated roller. If fixture attributes are being set, this
shows the possible settings which are available on the fixtures. Above
Attribute
groups
Menu
softkeys
Current
menu name
Information
window
Wheel
attributes
Current
selection
Touch to
change up
or down
Workspace
selection
buttons
To Next Page
Loading...
