Page 42 – 2. Setting up and using the console
TitanUniversal_Man_v8-0_TT.doc 05 August 2014
You can save any number of different shows on the Tiger Touch’s
internal hard disk.
2.6.3 Importing parts of other shows
If you are doing a show which is similar to a previous one, you might
want to import parts of the previous showfile, for example you might
want the palettes for some Robe Robins from another show, but not
the other fixtures. This is where the Import Show function comes in
handy.
For Import Show to work, you need to map fixtures from your
imported file to fixtures in the current show so that Titan knows
where to import the programming to.
You can then select items from the imported show and store them
onto workspace or panel buttons in your current show.
Import new show
Button for
imported show
Filter fixtures in
current show
Filter fixture list in
imported show
Fixtures in
imported show
Arrow shows
mapped fixture
To Next Page
Loading...
