Page 84 – 4. Controlling dimmers and fixtures
TitanUniversal_Man_v8-0_TT.doc 05 August 2014
2:
3:
4.1.22 Setting fixture/attribute times
Fade and delay timings can be directly set for each fixture or
individual attributes of a fixture. When you store the settings into a
cue, the time settings will then become part of the cue.
There are a number of ways to set the times:
• You can set individual attribute times by switching the wheels to
Fade Time / Delay Time mode using the [Wheels=] softkey on
the root menu.
• Individual attribute times can also be set using a combination of
the wheel @ keys and the TIMES key.
• They can also be set by selecting fixtures and entering into the
attribute times sub-menus from the TIMES key.
• There is also command syntax that allows various options to set
attribute time values - e.g. TIMES FIXTURE Position 5 @ 3
would set a 5s fade, 3s delay time onto the current fixture
selection P group. Wheel @ keys can also be used in the
syntax. Fan options are also available through syntax using
THRO.
To Next Page
Loading...
