interval, duration and speed can be
controlled.
Under status, “On” (√) and “Off”
can be selected. The automatic backwash
can always be activated with this.
7 days is the default setting for the
backwash interval. The duration of the
backwash cycle in shown in seconds. The
pump’s speed is controlled in levels with 3
levels (n1 – n3) to choose from.
Rinse settings
Under Rinse settings, the duration and pump
speed can be set. The duration is specified
in seconds and the speed is controlled in
levels with 3 levels (n1 – n3) to choose from.
A duration between 5 and 255 seconds can
be selected.
To Next Page
Loading...