Baumer VCXG.2 Series - Category: Colortransformationcontrol (Color Cameras Only)

11 | GenICam Camera Features Baumer
110 Operating Manual VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 | V1.2
VCXU.2
Values (Features)
Binning (BinningHorizontal, BinningHorizon-
talMode, BinningSelector, BinningVertical, Bin-
ningVerticalMode)
ImageControl (BrightnessCorrection, Defect-
PixelCorrection, LUTSelector, LUTEnable, Re-
verseX, ReverseY)
BlackLevel LineStatusAll
CounterValue OffsetX
DeviceTemperature OffsetY
ExposureTime PixelFormat
FrameID SequencerSetActive
Gain Timestamp
Height Width
Image
11.6 Category: ColorTransformationControl (color cameras only)
Category that contains the color transformation control functions.
The color processing is realized by 4 modules.
Camera
Module
Bayer
Processor
Color-
T
ransfor-
mation
RGB
r
g
b
r'
g
'
b'
r''
b''
g''
White balance
The sensor color signals r (red), g (green) and b (blue) are amplified in total and digitized within
the Camera Module.
Within the Bayer Processor, the raw signals r', g' and b' are amplified by color-channel- specific
factors. Next is interpolating the missing color values which will generate new ones (r'', g'', b'').
Color Transformation is next. Here, the previously generated color signals r'', g'' and b'' are con-
verted to optimized RGB (color adjustment as physical balance of the spectral sensitivities).