Baumer VCXG.2 Series - Category: Gigevision; Gvspconfigurationblockid64 Bit; Gevccp; Gevcurrentdefaultgateway

11 | GenICam Camera Features Baumer
196 Operating Manual VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 | V1.2
11.17.2 Category: GigEVision
Category that contains the features pertaining to the GigE Vision transport layer of the device.
11.17.2.1 GVSPConfigurationBlockID64Bit
Enables the 64 bit block ID length.
Name GVSPConfigurationBlockID64Bit
Category TansportLayerControl → GigEVision
Interface IBoolean
Access Read only
Unit -
Values true = 1 (On)
false = 0 (Off)
11.17.2.2 GevCCP
Controls the device access privilege of an application.
Name GevCCP
Category TansportLayerControl → GigEVision
Interface IEnumeration
Access Read / Write
Unit -
Values OpenAccess Open Access.
ExclusiveAccess Exclusive Access.
ControlAccess Control Access.
11.17.2.3 GevCurrentDefaultGateway
Reports the default gateway IP address to be used on the given logical link.
Name GevCurrentDefaultGateway
Category TansportLayerControl → GigEVision
Interface IInteger
Access Read only
Unit -
Values IP address