Baumer VCXG.2 Series - Colortransformationfactorylistselector; Colortransformationoutputcolorspace; Colortransformationresettofactorylist

11 | GenICam Camera Features Baumer
112 Operating Manual VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 | V1.2
11.6.3 ColorTransformationFactoryListSelector
Selects the OptimizedMatrix for the desired color temperature. All calculated color values are
based on the sRGB color space.
OptimizedMatrix parameterization will also set ColorGains for the light-matching white point.
INFO
We recommend to carry out a white balance after setting a matrix.
Name ColorTransformationFactoryListSelector
Category ColorTransformationControl
Interface IEnumeration
Access Read / Write
Unit -
Values OptimizedMatrixFor3000K Matrix is set to color temperature 3000K.
OptimizedMatrixFor5000K Matrix is set to color temperature 5000K.
OptimizedMatrixFor6500K Matrix is set to color temperature 6500K.
OptimizedMatrixFor9500K Matrix is set to color temperature 9500K.
11.6.4 ColorTransformationOutputColorSpace
Output the color space of the camera.
Name ColorTransformationOutputColorSpace
Category ColorTransformationControl
Interface IString
Access Read only
Unit -
Values Color space
11.6.5 ColorTransformationResetToFactoryList
Resets ColorTransformation to the selected ColorTransformationFactoryList.
Name ColorTransformationResetToFactoryList
Category ColorTransformationEnable
Interface ICommand
Access Write
Unit -
Values -