Baumer VCXG.2 Series - Acquisitionstatusselector; Acquisitionstop; Exposureauto

11 | GenICam Camera Features Baumer
80 Operating Manual VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 | V1.2
11.1.8 AcquisitionStatusSelector
Selects the internal acquisition signal to be read by AcquisitionStatus.
Name AcquisitionStatusSelector
Category AcquisitionControl
Interface IEnumeration
Access Read / Write
Unit -
Values Acquisition Ac-
tive
Device is currently doing an acquisition of one or many frames.
Acquisition Trig-
ger Wait
Camera awaits Trigger to acquire a single or several images.
11.1.9 AcquisitionStop
Stops the acquisition of the device at the end of the current frame.
Name AcquisitionStop
Category AcquisitionControl
Interface ICommand
Access Write only
Unit -
Values -
11.1.10 ExposureAuto
Sets exposure mode to automatic if ExposureMode = Timed. The exact algorithm used for im-
plementation is device-specific.
Name ExposureAuto
Category AcquisitionControl
Interface IEnumeration
Access Read / Write
Unit -
Values Continuous The camera is continuously adapting the exposure time for
maximized dynamic range.
Off Exposure duration is user controlled using ExposureTime.
Once Exposure time is adapted once. Once it has converged, it re-
turns to the Off state.