Baumer VCXG.2 Series - Acquisitionframecount; Acquisitionframerate; Acquisitionframerateenable

11 | GenICam Camera Features Baumer
78 Operating Manual VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 | V1.2
11.1.2 AcquisitionFrameCount
Number of frames to acquire in MultiFrame Acquisition mode.
Name AcquisitionFrameCount
Category AcquisitionControl
Interface IInteger
Access Read / Write
Unit -
Values 1 - 65535 (Increment: 1)
11.1.3 AcquisitionFrameRate
Controls the acquisition rate (in Hertz) at which the frames are captured.
Name AcquisitionFrameRate
Category AcquisitionControl
Interface IFloat
Access Read / Write
Unit Hz
Values depends on camera
11.1.4 AcquisitionFrameRateEnable
Enables the acquisition at the framerate specified by AcquisitionFrameRate.
Name AcquisitionFrameRateEnable
Category AcquisitionControl
Interface IBoolean
Access Read / Write
Unit -
Values true = 1 (On)
false = 0 (Off)