Baumer VCXG.2 Series - Gainauto; Gainselector

11 | GenICam Camera Features Baumer
96 Operating Manual VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 | V1.2
11.3.5 GainAuto
Sets the automatic gain control (AGC) mode. The exact algorithm used to implement AGC is
device-specific.
Name GainAuto
Category AnalogControl
Interface IEnumeration
Access Read / Write
Unit -
Values Continuous Gain is constantly adjusted by the device.
Off Gain is User controlled using Gain.
Once Gain is automatically adjusted once by the device. Once it has
converged, it automatically returns to the Off state. The level-
ling can take several images.
11.3.6 GainSelector
Selects which gain is controlled by the various gain feature.
Name GainAuto
Category AnalogControl
Interface IEnumeration
Access Read / Write
Unit -
Values All All Gain will be applied to all channels.
Blue Gain will be applied to the blue channel. (color cameras only)
Green Blue GreenBlue Gain will be applied to the green blue channel.
(color cameras only)
Green Red Gain will be applied to the green red channel. (color cameras
only)
Red Gain will be applied to the red channel. (color cameras only)