Baumer VCXG.2 Series - 13 Linepwmperiodtime; 14 Lineselector

11 | GenICam Camera Features Baumer
142 Operating Manual VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 | V1.2
11.10.13 LinePWMPeriodTime
Entire period duration in μs.
Name LinePWMPeriodTime
Category DigitalIOControl
Interface IInteger
Access Read only
Unit µs
Values PWM setting -specific.
11.10.14 LineSelector
Selects the physical line (or pin) of the external device connector to configure.
Name LineSelector
Category DigitalIOControl
Interface IInteger
Access Read / Write
Unit -
Values see table(s) below
LineSelector VCXG.2 VCXG.2XC VCXG.2.I VCXU.2
Line0 ■ ■ ■ ■
Line1 ■ (GPIO) ■ (GPIO) ■ ■ (GPIO)
Line2 ■ (GPIO) ■ (GPIO) ■ ■ (GPIO)
Line3 ■ ■ ■ ■
Line4 □ □ ■ □
Line5 □ □ ■ □
Line6 □ □ ■ □
Line7 □ □ ■ □