Baumer VCXG.2 Series - Sequencermode; Sequencerpathselector

Baumer GenICam Camera Features | 11
V1.2 | VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 Operating Manual 191
Values (Features)
CounterEventActivation OffsetX
CounterEventSource OffsetY
CounterResetActivation TriggerMode
CounterResetSource UserOutputValue
ExposureMode UserOutputValueAll
ExposureTime Width
Gain
11.15.4 SequencerMode
Controls if Sequencer is enabled.
INFO
To use this feature, the features BalanceWhiteAuto (color cameras only) and SequencerConfig-
urationMode must be = off.
To write this feature, set TLParamsLocked = 0.
Name SequencerMode
Category SequencerControl
Interface IEnumeration
Access Read / Write
Unit -
Values On Enables Sequencer.
Off Disables Sequencer.
11.15.5 SequencerPathSelector
Selects the path that contains the settings coming afterward.
Name SequencerPathSelector
Category SequencerControl
Interface IInteger
Access Read / Write
Unit -
Values 0 ... 3 (Increment: 1)