Baumer VCXG.2 Series - Genicam Camera Features; Category: Acquisitioncontrol; Acquisitionabort

Baumer GenICam Camera Features | 11
V1.2 | VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 Operating Manual 77
11 GenICam Camera Features
A GenICam™-compliant XML-description file presents the camera's Features. The following
chapter describes all included and accessible functions. Most of the camera's functions are
standardized in GenICam™ SFNC and must use the name defined in there. Particular Fea-
tures, which cannot be assigned to an existing GenICam™ SFNC name come as vendor-spe-
cific in the "Custom" namespace.
The Features are clustered in categories according to their function. The software uses them to
present the functions more clearly.
You can see your camera's Features functionalities in Feature Tree (1) of the Camera Explorer.
Please refer to the appropriate documentation.
1
11.1 Category: AcquisitionControl
This chapter describes all features related to image acquisition, including the trigger and expo-
sure control.
11.1.1 AcquisitionAbort
The abort of the image acquisition is a special case, where the ongoing acquisition is stopped. If
an exposure is running, the exposure is aborted immediately and the image is not read out.
Name AcquisitionAbort
Category AcquisitionControl
Interface ICommand
Access Write only
Unit -
Values -