Baumer VCXG.2 Series - Sequencersetactive; Sequencersetload; Sequencersetnext; Sequencersetsave

11 | GenICam Camera Features Baumer
192 Operating Manual VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 | V1.2
11.15.6 SequencerSetActive
Contains the currently active Sequencer Set.
Name SequencerSetActive
Category SequencerControl
Interface IInteger
Access Read / Write
Unit -
Values 0 ... 127 (Increment: 1)
11.15.7 SequencerSetLoad
Loads the Sequencer Set selected with SequencerSetSelector.
Name SequencerSetLoad
Category SequencerControl
Interface ICommand
Access Write only
Unit -
Values -
11.15.8 SequencerSetNext
Specifies the next Sequencer Set.
Name SequencerSetNext
Category SequencerControl
Interface IInteger
Access Read / Write
Unit -
Values 0 ... 127 (Increment: 1)
11.15.9 SequencerSetSave
Saves the current device state to the Sequencer Set selected by the SequencerSetSelector.
Name SequencerSetSave
Category SequencerControl
Interface ICommand
Access Write only
Unit -
Values -