What to do if the Bayrol Water System unit shows a dosing output of 0% although there is a deviation between actual value and setpoint?
If the unit displays a 0% dosing output despite a difference between the actual value and the setpoint, it could be due to an alarm blocking the dosing process. This could be a flow, level, or dosing time alarm. You should remediate the cause of the alarm and then acknowledge the alarm.
What to do if the Bayrol Water System dosing pump is not running despite the unit showing dosing output?
If the dosing pump isn't running even though the unit indicates dosing output, the fuse on the dosing pump may be burnt, needing replacement (2SB). Alternatively, the dosing relay could be defective, requiring replacement of the respective relay. In some cases, the dosing pump itself might be defective and require replacement.
What to do if the Bayrol Water System dosing pump continues to run despite the unit showing a dosing output of 0%?
If the dosing pump continues to run even when the unit displays a 0% dosing output, the fuse on the dosing pump might be burnt. Replace the fuse (2SB). Another possible cause is a defective dosing relay, which would require replacing the respective relay. Finally, the dosing pump itself may be defective and need replacement.
Covers pH value importance and disinfection methods for optimal pool water quality.
Outlines when calibration is needed and details the pH electrode calibration process.
Describes calibration procedures for chlorine, bromine, redox measurements, and determining the redox setpoint.
Explains the automatic dosing concept for Bayrosoft®, including main, refresh, and additional dosages.
Explains the option to add product manually for various modules and how to access manual dosing.
Details monitored alarm statuses like flow, level, and value alarms, and how they affect operation.
Explains user administration, access rights, remote access configuration, and user level adjustments.
Provides safety warnings for switch outputs and an overview of their features.
Covers safety, overview, and configuration menus for filter pump control.
Covers overview, temperature measurement, function, and menu settings for heating control.
Details the overview, function, and menu configuration for controlling a solar heating system.
Covers menu configuration and electrical connection for salt electrolysis systems.
Explains the Eco mode function, its menu, and basic configuration for energy saving.
Provides critical safety information and hazards related to installation, start-up, and maintenance.
Details monthly, quarterly, and annual maintenance tasks, cleaning, and replacing pump hoses.
General| Brand | Bayrol |
|---|---|
| Model | PoolManager PRO |
| Category | Lighting Equipment |
| Language | English |
To Next Page
