BEALE DP500 - Harmony Speed; MIDI In

A part of Australian history since 1893.
5
0
Harmony Speed
MIDI In
When the harmony type is echo,
tremolo or trill, the harmony speed
can set the harmony effect note speed
to 4 default speed.
1. Holding down SHIFT button,
press FUNCTION+/- button to
select harmony speed menu. LCD
displays “xxx HarmonySpeed”.
Use +/YES / -/NO or data dial
to change harmony speed. Range:
1~4.
2. Press +/YES and -/NO
simultaneously will set the chorus
volume to its default setting: 001.
1. Holding down SHIFT button,
press FUNCTION+/- button
to select MIDI in menu. LCD
displays “xxx MIDI In”. Use
+/YES / -/NO or data dial to
change MIDI in channel:
1~16, ALL.
2. Press +/YES and -/NO
simultaneously will set the MIDI
in channel to its default
setting: ALL.
SHIFT
- +
FUNCTION
harmony speed001
SHIFT
- +
FUNCTION
MIDI IN001
SHIFT
- +
FUNCTION
MIDI OUT001
SHIFT
- +
FUNCTION
POWER OFF030
SHIFT
- +
FUNCTION
PERFORM BEAT4-4
SHIFT
- +
FUNCTION
harmony speed001
SHIFT
- +
FUNCTION
MIDI IN001
SHIFT
- +
FUNCTION
MIDI OUT001
SHIFT
- +
FUNCTION
POWER OFF030
SHIFT
- +
FUNCTION
PERFORM BEAT4-4