Beam ECG - Page 37

37
Beam
®
, Operating Manual, Rev. 4.6.1 01/2016, GmbH
Hypertension-Management-Software Client-Server
®
4
Step ECG Recorder Beam
®
PC
5)
► Click on
.
The prepare measuring
device window appears.
► Click on
.
Warning: The time will be taken
transferred from the com-
puter. Check the correct
time on your computer.
► Click on
.
► If you are using single-use
electrodes now plug the
cables into the device.
► Click on
.
The training window with an
online ECG transmission
appears.
► Close the window when
the training is success-
fully completed.
► Click on
.
6) Buzzer sounds.
7) ► In the task bar click on
.
► The program will be closed.