Operating Instructions
Frequency Selection Modes
106 Transceiver Family 620X DV14307.03 Issue 04 March 2016
3.5.5. Automatic Storage Function
The transceiver stores 9 recently selected frequencies and updates the last channels database during
operation in "Standard Mode", "Direct Tune Mode" and "Scan Mode".
When changing to a new active frequency, the previous active frequency is stored "LAST" in memory
LAST 1. The frequencies previously located in LAST 1…LAST 8 are shifted to memory channels
LAST 2…LAST 9. This algorithm ensures the last 9 used active frequencies are available. Last used
frequencies "LAST" can be recalled in channel mode (see "Channel Mode" page 104).
Note The function "LAST" and Store/Restore to channels are only available if this options are
activated in "Configuration Settings" - "MEM OPTIONS".
3.5.5.1. Delete data:
The stored content in User Channel Database can only be deleted in "Configuration Settings". Please
note the whole channel database will be reset.
To Next Page
Loading...
