General Description
Technical Data
DV14307.03 Issue 04 March 2016 Transceiver Family 620X 27
Electrostatic Discharge 25.0 A
aerospace environment
1.7.7. Software
The design and development processes used for AR6201 family software are in compliance with the
rules given in EUROCAE/RTCA Document ED-12B/DO-178B; “Software Considerations in Airborne
System and Equipment Certification”. Hereby ‘Design Assurance Level’ (DAL) “C” was followed and
the complete software documentation is based on this level.
Nevertheless, Becker claimed for AR6201 family software in accordance with EUROCAE/RTCA
Document ED-12B/DO-178B the Design Assurance Level D.
Refer to AC 23.1309-1D and/or AC 23.1309-1E to see limitations for installations into aircrafts.
The conditions and tests required for TSO approval of this article are minimum performance
standards. It is the responsibility of those installing this article either on or within a specific type or
class of aircraft to determine that the aircraft installation conditions are within the TSO standards. TSO
articles must have separate approval for installation in an aircraft. The article may be installed only in
compliance with 14 CFR part 43 or the applicable airworthiness requirements.
1.7.8. Complex Hardware
The 620X devices do not contain complex hardware.
To Next Page
Loading...
