Installation
Device Assignment
34 Transceiver Family 620X DV14307.03 Issue 04 March 2016
Make sure to transport the device always in a safe manner and with the aid of suitable lifting
equipment if necessary. Do never use the electric connections for lifting. Before the transport, a clean,
level surface should be prepared to place the device on. The electric connections may not be
damaged when placing the device.
First Device Checkup
• Check the device for signs of transport damages.
• Please verify if the indications on the type plate correspond to your purchase order.
• Check if the equipment is complete ("Scope of Delivery", page 34).
Storage
If you do not wish to mount and install the device immediately, make sure to store it in a dry and clean
environment. Make sure that the device is not stored near strong heat sources and that no metal
chippings can get into the device.
2.3. Device Assignment
This manual is valid for the following devices:
• AR6201-(XX2)
• AR6203-(XX2)
• RT6201-(XX0) with RCU6201-(X12)
SCI1050S305 Version 4.06
SCI1051S305 Version 2.06
Details see "Variants Overview", page 14
2.3.1. Scope of Delivery
• Manuals
o Operating Instructions.
• Device in accordance with your order.
• Device accessories
• Documents of Certifications if available
2.3.2. Additional Required Equipment
• Mounting kit MK6403-1 (for AR6203)
• Mounting kit MK6201-(10) (for RT6201 to meet the conditions for certification).
• Connector kits.
• Cable harness.
Details see "Order Code" page 30
To Next Page
Loading...
