Becker AR620X - Factory Default Settings

Installation
Factory Default Settings
68 Transceiver Family 620X DV14307.03 Issue 04 March 2016
2.9. Factory Default Settings
 Enabled  Disabled  Selected  De-Selected
Setting name
Value
DEVICE INFO
DIMMING INPUT
NONE
BRIGHTNESS
50%
MEMORY OPTIONS

CHANNEL STORE
 STORE LAST CHANNEL
MDE PAGES

STANDBY FREQUENCY
 BATTERY VOLTAGE
 CHANNEL MEMORY
LOW BATT THR
10.5 V AR6201-(X2X)
21.0 V AR6201-(X1X)
CONFIG

TANDEM
 AUX_IN
 AUTO ISOL IN TX
 SCAN BEEP
 FREQ CHANGE BEEP
 SWAP MIKE IC
IN/OUT CFG1
MICROPHONE 1
 STD 1 MIKE
 STD 2 MIKE
 STD 3 MIKE
 DYN MIKE
 NONE
MICROPHONE 2
 STD 1 MIKE
 STD 2 MIKE
 STD 3 MIKE
 DYN MIKE
 NONE
MIC ACTIVATION
 BOTH MIKES
OUTPUTS
 HEADPHONE 1
 HEADPHONE 2
 SPEAKER
 NONE