AeroNav 900/880 Series Pilot’s Guide
89000039-010
7-58 General Rev 1 May 2019
TIPS AND TECHNIQUES
Select Only Desired Files For Upload
If you keep reusing the same fob for database
uploads, be sure to either delete all out-of-date and
non-desired files or take care in selecting/de-
selecting files from the AeroNav display list. Not
doing so may extend data upload times considerably
by uploading unintended files.
NOTE
Do Not Power Off the AeroNav During Data
Update
Cycling power to the AeroNav during a database
update may result in a corruption of the memory
device that stores the databases. If this happens, a
service action may be required to restore the data
integrity. Use of a ground power unit is
recommended.
A progress bar will be presented as the loading process
proceeds. During the process, various messages may appear
To Next Page
Loading...
