►
Check the hydraulic system for leaks. Retighten loose screw connec‐
tions. Immediately renew hydraulic lines that are defective, have damp
bindings, are cracked or kinked.
►
Check the fill level in the hydraulic tank (→ 9.3.3).
►
Check the machine for external signs of damage.
►
Check all screw connections are firmly tightened, and retighten them if
necessary. Comply with the permitted tightening torques (→ 14.4).
50-020-1011-900_EN
1.0 - © 2/15/2017
158
7 Installation, initial startup and function test
7.3 Initial startup and function test of the machine
To Next Page
Loading...
