8.2.6.4
EMERGENCY STOP
switch
Pressing the
EMERGENCY STOP
switch (1) immediately stops the move‐
ment of the machine. The drive motor and the hydraulic functions of the
bodies remain in operation. All
EMERGENCY STOP
switches must be
unlatched so the machine can be taken back into operation.
Before unlatching the
EMERGENCY STOP
switch, it is necessary to ensure
that no third parties are exposed to hazard.
The
EMERGENCY STOP
switch is located on the front control station.
Fig. 8.26
50-020-1011-900_EN
1.0 - © 2/15/2017
195
8 Operation
8.2 Operation of the machine
To Next Page
Loading...
