8.2.6.5 Foot pedals
Pressing the inching pedal (1) decelerates the travel movement of the
machine in working and transport mode.
In transport mode, the travel speed is regulated using the accelerator pedal
(2).
In working mode, the engine speed and the maximum speed are set via the
dial switch (→ 8.2.6.6). Pressing the accelerator pedal accelerates the
machine continuously up to the set maximum speed.
Fig. 8.27
50-020-1011-900_EN
1.0 - © 2/15/2017
196
8 Operation
8.2 Operation of the machine
To Next Page
Loading...
