EasyManua.ls Logo

bergmann 4010 - Travel Modes and Driving

bergmann 4010
284 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The engine speed is restricted to about 1500 rpm when the hydraulic
system is cold, so as to avoid damaging the drive motor.
The restriction is lifted once a hydraulic fluid temperature of approx. 30 °C
has been reached.
8.5 Travel mode
DANGER
Risk of accident due to persons being in danger areas!
A risk of accident is posed if persons are in the danger areas when the
machine is being operated.
n The operator must make sure that no persons are in the danger areas
when the machine is being operated.
n Should not all danger areas be able to be seen by the operator, then
he/she must assign a banksman.
50-020-1011-900_EN
1.0 - © 2/15/2017
212
8 Operation
8.5 Travel mode

Table of Contents

Related product manuals