Braking the machine
CAUTION
Risk of accident due to activating the parking brake during the drive!
Activating the parking brake during the drive will lead to the machine
stopping immediately.
n Never activate the parking brake during the drive.
n The lap belt on the operator's seat must be fastened.
Press the inching pedal to brake the machine.
Pressing the inching pedal achieves the same braking effect as when
switching in neutral position.
Driving in working mode
In working mode, the maximum speed is controlled via the
speed
dial switch
and using the accelerator pedal.
►
Press the inching pedal.
►
Release the parking brake.
50-020-1011-900_EN
1.0 - © 2/15/2017
217
8 Operation
8.5 Travel mode
To Next Page
Loading...
