►
Move the travel direction switch to the central position (→ 8.2.6.7).
►
Apply the parking brake (→ 8.2.6.7).
►
Switch off the ignition (→ 8.2.6.3).
Parking the machine
Procedure for parking the machine, e.g. at the end of a shift.
►
Move the bodies to the transport position.
►
Move the
Body hydraulics
switch to the transport position.
►
Switch off the drive motor.
►
Remove the key.
►
Close the side window (→ 8.2.1.1).
►
Lock the operator's door after leaving the operator's cab.
The following applies if the machine will be parked for a long time:
►
Disconnect the electrical power supply at the battery main switch
(→ 8.2.6.1).
50-020-1011-900_EN
1.0 - © 2/15/2017
228
8 Operation
8.10 Switching off the machine
To Next Page
Loading...
