Fault Possible cause of fault Troubleshooting
Hydraulic fluid gets too hot.
►
Check the hydraulic fluid heat
exchanger for contamination
and clean it with air if neces‐
sary.
Significant leak at the hydraulic
connections or defective hydraulic
line.
►
Check the hydraulic system for
leaks and repair it if necessary.
Incorrect hydraulic settings.
►
Check the settings and correct
them if necessary.
Alternator
indicator light lights up. Alternator does not function. V-belt defective.
►
Renew the V-belt.
Alternator defective.
►
Renew the alternator if defec‐
tive.
Engine oil pressure
indicator light
lights up.
Engine oil level too low.
►
Switch off the machine immedi‐
ately.
►
Check the engine oil level.
50-020-1011-900_EN
1.0 - © 2/15/2017
258
10 Malfunctions and troubleshooting
10.2 Malfunctions
To Next Page
Loading...
