Fault Possible cause of fault Troubleshooting
►
Top up engine oil if necessary.
Engine oil pump defective.
►
Switch off the machine immedi‐
ately.
►
Contact customer service.
Engine temperature too high
indi‐
cator light lights up.
Coolant level too low.
►
Switch off the machine without
delay and allow it to cool down.
►
Check the coolant level.
►
Identify the cause of the low
coolant level and rectify it.
Contact customer service if
necessary.
►
Top up coolant if necessary.
Defect in the coolant circuit.
►
Switch off the machine without
delay and allow it to cool down.
►
Contact customer service.
Drive motor does not start. Pre-glow temperature not reached.
►
Repeat the pre-glow procedure
for the drive motor.
50-020-1011-900_EN
1.0 - © 2/15/2017
259
10 Malfunctions and troubleshooting
10.2 Malfunctions
To Next Page
Loading...
