Fault Possible cause of fault Troubleshooting
Fault in the fuel supply.
►
Check the fuel level.
Top up the machine if neces‐
sary.
►
Check the fuel filter and renew
it if necessary.
Battery flat.
►
Check the battery.
►
Recharge or renew the battery
as required.
Drive motor switches off. Fault in the fuel supply.
►
Check the fuel level.
Top up the machine if neces‐
sary.
►
Check the fuel filter and renew
it if necessary.
Air temperature in the operator's
cab too cold.
Temperature regulator not set cor‐
rectly.
►
Check the settings on the con‐
trol and correct them if neces‐
sary.
50-020-1011-900_EN
1.0 - © 2/15/2017
260
10 Malfunctions and troubleshooting
10.2 Malfunctions
To Next Page
Loading...
