bergmann 4010 - Hydraulic System Issues

10.2.3 Malfunctions of the hydraulic system
Fault Possible cause of fault Troubleshooting
Unusual noises in the hydraulic
system.
Hydraulic fluid level too low.
►
Find out the cause of the low
hydraulic fluid level.
Rectify the cause, if found.
►
Top up hydraulic fluid.
Hydraulic fluid filter contaminated.
►
Renew the hydraulic filter ele‐
ment.
Consumers do not function cor‐
rectly.
Hydraulic fluid gets too hot.
►
Check the hydraulic fluid heat
exchanger for contamination
and clean it with air if neces‐
sary.
50-020-1011-900_EN
1.0 - © 2/15/2017
263
10 Malfunctions and troubleshooting
10.2 Malfunctions