11 Disassembly
When dismantling the machine, comply with the requirements of the acci‐
dent prevention regulations, environmental protection and any safety regu‐
lations of the country in question.
In addition to the regulations listed here, the general safety regulations
(→ 3) must be complied with in full.
Before dismantling the machine:
►
Give the machine a general clean.
►
Drive/transport the machine to a suitable disassembly location.
n Collect service fluids in a suitable container.
n Dispose of the service fluids correctly, in accordance with the regula‐
tions; comply with regional regulations on the disposal of oils and lubri‐
cants, for example.
►
Drain the service fluids (oil/coolant).
►
Provide equipment to assist with assembly (e.g. tools, chain hoists).
50-020-1011-900_EN
1.0 - © 2/15/2017
270
11 Disassembly
To Next Page
Loading...