Bernina 590 - Securing Stitches with BSR

BERNINA Stitch Regulator (BSR)
137
Securing in BSR2 mode
Prerequisite:
• The BSR presser foot is attached and connected with the machine.
• The BSR display is open and the BSR2 mode is activated.
> Lower the presser foot.
> Touch the icon «i»-Dialog.
> Touch the icon «Securing».
> Push the button «Start/Stop».
> Press the foot control or the button «Start/Stop».
By moving the fabric some short securing stitches are sewn, then the programmed stitch length is activated
and the securing function is deactivated automatically.