Bernina 590 - Threading; Threading the Upper Thread

Sewing preparation
47
2.11 Threading
Threading the upper thread
Prerequisite:
• The needle and the foot are raised.
• The machine is switched off and disconnected from the power supply system.
> Place the foam pad on the spool pin.
> Place the thread spool on the spool pin so that the thread is unwound clockwise.
> Add the appropriate spool disc.
> Guide the thread in direction of the arrow through the rear thread guide (1) and hold the thread with the
hands so that it is taut and can be inserted into the thread tension.
> Guide the thread in direction of the arrow through the thread tension (2).
1
2
> Guide the thread downwards around the thread take-up lever cover (3).
> Guide the thread upwards and insert into the thread take-up lever (4).
3
4
5
> Guide the thread downwards again (5).