Bernina 590 - Calling up the Embroidery Consultant; Calling up the Help; Cancelling any Alterations with Clr

System settings
76
4.4 Calling up the embroidery consultant
The Embroidery Consultant provides information about decision support concerning embroidery projects.
After entering the fabric and the desired embroidery project, suggestions for the suitable needle and the
suitable embroidery foot are displayed.
Prerequisite:
• Embroidery mode is active.
> Touch the icon «Home».
> Touch the icon «Embroidery Consultant».
> Select the embroidery project.
> Select the fabric which is to be embroidered.
> Touch the icon «Confirm».
– If the embroidery motif has already been selected, a warning appears that it will be overwritten.
4.5 Calling up the Help
> Touch the window in the display where help is needed.
> Touch the icon «Help» to start the help mode.
> Touch the icon in the display where help is needed.
– Assistance concerning the selected icon is displayed.
4.6 Cancelling any alterations with «clr»
Any alterations to motifs can be reset to default setting. Exceptions are saved motifs which have been filed in
the personal memory and monitoring functions.
> Touch the icon «clr».