Bernina 590 - Pinpoint Placement; Positioning of Grid Points

Creative embroidering
166
> Select an embroidery motif combination.
> Touch the icon «Ungroup».
– The combination is ungrouped.
or
> Create an embroidery motif combination.
> Select all embroidery motifs (2).
2
> Touch the icon «i»-Dialog.
> Touch the icon «Group».
– All embroidery motifs are added to the embroidery motif combination.
> Select an embroidery motif combination.
> Touch the icon «Ungroup».
– The combination is ungrouped.
15.6 Pinpoint placement
Positioning of grid points
This function allows the exact positioning of the embroidery motif on the fabric in an easy way. The
positioning points can be placed in the grid.
Prerequisite:
• Any two points of the embroidery motif are marked with chalk or a water-soluble pen on the fabric. The
place or the location where the embroidery motif is to be positioned is clearly visible.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Pinpoint placement».
> Touch the icon «Grid».
– The embroidery motif is given a grid with nine different location/positioning points.
> Select the desired positioning point to which the embroidery motif is to be adjusted.
– The point changes its color.
> Turn the «Upper Multifunctional knob» or the «Lower Multifunctional knob» to the left or to the right to
position the needle above the respective mark on the fabric.