Bernina 590 - Needle and Stitch Plate Maintenance

Sewing preparation
45
> Touch the icon «Needle type/Needle size».
> Select the needle type (1) of the inserted needle.
> Select the needle size (2) of the inserted needle.
1
2
Adjusting the needle position up/down
> Push the button «Needle up/down» to lower the needle.
> Push the button «Needle up/down» again to raise the needle.
Adjusting the needle position left/right
There is a total of 11 needle positions. The needle position is indicated by the needle position number in the
display.
> Push the button «Needle left» (1) to move the needle to the left.
> Push the button «Needle right» (2) to move the needle to the right.
1
2
Needle stop up/down (permanent)
> Touch the icon «Needle stop up/down (permanent)» to fix the needle position permanently.
– The machine stops with needle position down as soon as the foot control is released or the button
«Start/Stop» has been pressed.