Bernina 590 - Threading the Triple Needle; Winding the Bobbin Thread

Sewing preparation
50
> Thread the second thread manually into the left needle.
Threading the triple needle
Always insert a foam pad when using the retractable spool pin. It prevents the thread from getting
hooked at the spool pin.
Prerequisite:
• The triple needle is inserted.
> Place the foam pad, the thread spool and the appropriate spool disc on the spool pin.
> Place the filled bobbin on the retractable spool pin.
> Place the appropriate spool disc.
> Place the thread spool.
> Thread the 3 threads up to the upper thread guide.
> Guide 2 threads past the thread tension discs on the left and to the thread guide above the needle.
> Guide 1 thread past the thread tension disc on the right and to the thread guide above the needle.
> Thread the first thread into the left needle manually.
> Thread the second thread into the center needle manually.
> Thread the third thread into the right needle manually (see page49).
Winding the bobbin thread
The bobbin thread can be wound while embroidering if the retractable spool pin is used for winding.
Prerequisite:
• The foam pad, the thread spool and the appropriate thread disc are positioned.