Bernina 590 - Use of the Power Cable (Only Usa;Canada)

My BERNINA
25
Illustration Name Purpose
Height compensation
tool
The height compensation tool levels an angled
position of the presser foot sole when sliding over
thick seams.
Selection of needles The needle assortment contains different versions
and sizes of needles for all the common
applications.
Screwdriver red The red screwdriver is supplied as an all-roand tool.
Brush The brush is used to clean the feed dog and the
hook area.
Lubricator The lubricator is used to fill up the oil depots.
Power cable The power cable connects the machine with the
power supply system.
Foot control Via the foot control the machine is started and
stopped. The speed of the machine is also
controlled via the foot control.
Always use the foot control of the type LV1 with
this machine.
Use of the power cable (only USA/Canada)
The machine has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the
plug in any way!